SOLO Typ: 111 32.3cc 2.0 hp Solo 2-Stroke 2-Cycle Engine, 7,500 rpms. All Angle Clutch Shaft, Recoil pull start. This would make a very good Drone or RC plane, RC Vehicle engine. This engine is sold "AS IS", No warranty - No Refund. Each engine is test started before shipping. Not many left and now on Close out.
Very High Quality engine made in Germany (Deutschland).SOLO Kleinmotoren GmbH was founded in Stuttgart in 1948.
Mix at a ratio is 50 : 1 when using a High Quality Air Cooled Two Cycle oil JASO FD oil or higher. The Maruyama XD formula Product ID: 0028or2285
This engine DOES NOT works with our 18.75 to 1, 16.07 to 1 and 4.28 to 1 reduction gear boxes. The 78mm or the 54mm Double Bearing clutch housings. As of 12-16-22 we do make kits with the Solo Engine and are listed on the website.
Used on the CL825 "Chipper Lite" StrikeMaster Ice Auger. This would be the replacement engine. This Solo Typ: 111 engine has the same four hole bolt pattern, BUT the threaded hole are 5mm x 0.80 threads, NOT 6mm x 1.0 threades. The Three (3) shoe clutch rotor on the enigne is: 2.26" or 57.50mm OD. It's NOT the same size as a Honda GX25, slightly larger. The bolt pattern is the same as the GX35 nut with 5mm x 0.80 threads.
Also SPECIAL NOTE about the clutch rotor and clutch drum - clutch bell.
Clutch Drum 2.37" ID with a 1/2" Hole, 2.5" OD, Height 0.87" Fits the SOLO Typ: 111 32.3cc Two Stroke Engine.
It has 25%more power then a Honda GX35. It has the same power then a Honda GX50.
If using this on one of our products you have to order the bracket, throttle cable and small black lever seperate if needed.
.jpg?m=1773684017)
