Motorized Bicycles Detail Page

staton-inc striped

<< Back
9 Tooth 410H or #65 Sprocket Zinc Plated.

Aditional Image(s):

9 tooth 410H or #65 Sprocket. 5/8 inch ID 410H Machined for most of our outside drive & Inside drive Gear Boxes with the shorter shaft. These are milled to a 1/2 inch thick and zinc plated. This sprocket has a 1/2 inch pitch x 1/8 inch wide teeth with a 3/16 inch key way. These sprockets are made to be used with 410H chain but can also be used with the wider 415H (1/2 inch pitch x 3/16 inch wide teeth) and with the wider #41 chain that is (1/2 inch pitch x 1/4 inch wide teeth).
Price: $14.00
Quantity
Color

Send To Friend

	The products below were also bought by people who bought 9 Tooth 410H or #65 Sprocket Zinc Plated.
	3/16 x 3/16 x 1/2 Sq. Key
	Shaft Collar, 5/8 inch steel with set
	Chain 410H Silver Nickel, 1/2 x 1/8 , 98 Links.
	5/8 inch OD Shaft with a 3/16 inch full key way.
	Sprocket 5/8 inch ID 410H Machined 1/2 thick Gearbox, 8 to 12 teeth.

	Related Products. The products below are related to 9 Tooth 410H or #65 Sprocket Zinc Plated.
	3/16" x 3/16" x 1/2" Sq. Key
	5/8" Ext Snap Ring
	8 to 20 Tooth 410H or #65 Sprocket Heat Treated and Zinc Plated

Click here to write a Product review

home | contact us | check out | shopping cart | privacy policy | site map

*Staton-Inc.com is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice.*