41 A 27 Tooth 6 HOLE (DIMPLE drill mark*) Sprocket for the Stewart Manufacturing Corporation Differentials that have the "Black Oxide shafts" with 1-14 TPI threaded ends. 4.58" OD
NOTE: We drilled a SIX hole pattern so you can use the sprocket on either side if the hub. One side only has four (4) through holes.
The other side has 4 through holes and two drilled and tapped with a 5/16-18 thread, making six holes.
Use # 41 Chain 1/2" pitch x 1/4" width.
Note: If you do not see the sprocket size or type you want and we stock them, we can custom CNC machine them for you. Send an email with what you want. We will be adding more sprockets soon.
* = denotes the "Drill dimple" in between the two holes that this bolt pattern is for the differentials that have the Black Oxide shafts with 1-14 TPI (Threads Per Inch) threaded ends. This sprocket does NOT fit the PEERLESS brand differentials. They have a slightly different bolt pattern is different.
.jpg?m=1773684017)
