sign in | check out | register | search | shopping cart | galleries | website home
 Home | About Us
Login / Register | My Cart (Your Shopping Cart is Empty)  
CNC Machining Services
Job Opportunities Now Open
1. Motorized Wheelbarrow
2. Parts for Motorized Wheelbarrow
3. Friction Drive Bicycle Engine - Motor Kits
4. Parts for Friction Drive
5. Axle Mounted Bicycle Gear & Chain Drive Engine - Motor Kits
6. Parts for Axle Mount kits
7. Two Wheel Bicycle Gear & Chain Drive Engine - Motor Kits
8. Parts for Two Wheel kit
9. Three & Four Wheel Trike / Quad Gear & Chain Enigne - Motor Kits
10. Parts for Three & Four Wheel kit
12. Parts for NuVinci Gear & Chain Drive kit
13. Outdoor Power Equipment
14. Staton-Inc Drive Components
15. Electric Motor Bicycle - Trike Motor Kits - All Styles
16. All Engines Two and Four Cycle All Sizes
17. Miscellaneous Engine Parts
18. Subaru Robin - Makita Numazu Corp. Engine Parts
19. Tanaka - HITACHI - NIKKO Engine Parts
20. Maruyama Engine Parts
21. Mitsubishi Engine Parts
22. 43cc Two Cycle China made clone Parts
23. Honda Engine Parts
24. Adaptor - Adapter for Freewheel & Three Prong Sprockets, Track Cogs
15 mm ID Adaptors
25. Multi-Speed Bicycle Sprockets and Roller Chain 1/2" Pitch x 3/32" Width
410 # 43 or # 65 Single Speed Bicycle Sprockets and Roller Chain 1/2" Pitch x 1/8" Width
# 40 Sprocket and Roller Chain 1/2" Pitch x 5/16" Width
# 415 Sprocket and Roller Chain 1/2" Pitch x 3/16" Width
26. # 41 Sprocket and Roller Chain 1/2" Pitch x 1/4" Width
# 25 Sprocket and Roller Chain 1/4" Pitch x 1/8" Width
# 35 Sprocket and Roller Chain 3/8" Pitch x 3/16" Width
# 50 Sprocket and Roller Chain 5/8" Pitch x 3/8" Width
# 60 Sprocket and Roller Chain 3/4" Pitch x 1/2" Width
# 80 and Larger Sprockets and Roller Chain
White Industries Freewheels & Products
Bicycle Accessories
Wheels, Rims, Spokes & Tires
Bicycles and Trikes
Bike Components
Drive Components and Hardware
EV Warrior Electric Bikes
Close out, Used, One of a Kind, Sold "AS IS"
Whole Pecans
Very Bad Experience with PayPal and eBay - Dishonest Customer
Signup for our newsletter
Email Address :
Click here to unsubscribe
Contact Us

3310 S. Brunson Street
Oklahoma City, OK
73119 USA

Phone & Fax:
(405) 605-3765

Sales Questions:

Technical Questions:

My Profile

Spring 2,000 rpm for the Honda GX100 3 Shoe Clutch rotor

Spring 2,000 rpm  for the Honda GX100 3 Shoe Clutch rotor
Click over image to enlarge
Price: $2.20
Manufacturer: Staton-Inc
Product ID: 3553
Weight: 0.10 lbs
More images
Click over image to enlarge
Quantity :

Spring Honda GX100 2,000 rpm's Super Duty Clutch rotor.  Sold By the each.

This spring has SIX coils.

Note:  The Honda GXH50 runs from about 2,250 to 7,800 rpm's.  You may not be able to get the engine to run slow enough to use these springs.


If you are wanting to install new springs or shoes remove the three screws that hold on the plate, then remove the plate and set aside, then lift up the shoes a little at a time on each shoe until the clutch shoes & springs come off the body of the rotor. 

Place the New springs on the new shoes as before or shown on the web site. 

Then place the assembly over the body of the rotor and work the shoes in place.  You should be able to do this by hand - no tools needed. 

Once the new shoes and springs are in place, put the retaining plate back over the shoes and install the three screws. 

Do not use lock light on these screws and do not over tighten these screws.

If the body of the rotor does not need to be removed. 

Remove the 1/4-28 button head bolt and the flat washer that holds the rotor on to the engine, then lift the complete rotor off the shaft of the engine. 

Be sure and do not do not put too much pressure on the engine casting or you can damage it.






My Cart
Your Shopping Cart is Empty
Home | Site Map | Terms and Conditions | Contact Us | About Us | How to Enable Cookies | Privacy Policy
  Powered by Newtek Cart - Shopping Cart Software