Friction Drive Rear or Front Mount Kit less the engine.
If you want a front mount kit for a trike be sure and click on the front mount kit.
No Engine.
MADE IN THE USA.
One: Custom made 60" long throttle cable with the small lever & #16 mini hose clamp.
Four: 8” long Black Nylon ties to secure the throttle cable and stop switch wire to the frame.
One: Remote push button stop - kill switch with connecting end (s).
Two: ¼” x ¾” x 15” long Aluminum flat bar, CNC machined and Black Anodized.
One: Alloy Skewer - Quick Release, 5m -.80 x 161mm with channel spacers and hardware.
One: "U" Bracket with backer plate, zinc plated with hardware
Four: 6mm x 1.0 Hex Head Bolts.
One: Engine steel, zinc plated.
One: 76 mm Clutch Drum with 3/8-24 right hand threads.
One: 5/16" Flat Washer - used as a spacer between the bearing and clutch drum.
One: 1/4" thick Aluminum Extrusion channel that is CNC machined and Anodized Black.
( not a bent thin piece of steel like the others that have tried to copy my product )
Two 5/8” ID x 1-3/8" OD x 7/16" wide High Speed Double Sealed Ball Bearings with retaining ring.
We use one High Speed Double Sealed Ball Bearing on each side of the Drive Roller to support it and remove all the pressure off the engine.
Rear mount kits will come with a 60" long throttle cable with the small black lever and hose clamp.
Front mount kits will come with a 30" long throttle cable with the small black lever and hose clamp.
This includes the remote stop - kill switch and throttle cable* for the engines listed in the drop down boxes.
This kit includes every thing 'except' the engine*.
Your pick of the drive roller list here. .930", 1", 1-1/8" or 1-1/4".
Note: The 1-3/8" or 1-1/2" is no longer a choice with this kit.
If you want the larger drive roller, check the size you want, then Click Here and add this $10.00 fee to your order.
If you fail to add the $10.00 extra fee we will send a 1-1/4" drive roller.
Your pick of the 54 mm or 78 mm clutch drum & spacer for the engines that are listed on the web site plus some others.
Be sure and let us know is you have the Robin Subaru EH025 or EH035, TANAKA PF-4000 Tanaka 33 & 35 cc, Mitsubishi TL23 22.6cc, TLE33 33cc, or TLE43 42.7cc, Honda GX22, Honda GX25, Honda GX31, Honda GX35, LEHR Propane 25cc and some of the China made engines.
Note: We only can made a throttle cable for the engines that we sell or know what type of throttle they need.
If you have a China made engine or one that is not listed you will get a cable and a #48 brass end for you to solder on. Measure twice, cut once!!!
If you want to use the Honda GXH50 you will have to add the parts below.
; "Friction Drive Kit Complete less the Engine. Made in the USA.")
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
;)
