7/8" ID x 1/2" wide Adaptor for Freewheel Sprocket

Staton-Inc.
3310 S. Brunson Street
Oklahoma City, OK
73119 USA

Phone & Fax:
(405) 605-3765

Sales Questions:
sales@staton-inc.com

Technical Questions:
davidstaton@staton-inc.com

My Profile

Home / 15. Electric Motor Bicycle - Trike Motor Kits - All Styles

Printable Version

7/8" ID x 1/2" wide Adaptor for Freewheel Sprocket
Click over image to enlarge	Price: $14.78 Manufacturer: Staton-Inc Product ID: 3212 Weight: 0.20 lbs Special Offer Buy 10 - 29 get 10.00000 % off Buy 30 - 50 get 15.00000 % off E-mail to a friend \| Add To Wish List
More images Click over image to enlarge
Purchase
Quantity :
	The selected item is out of stock, please select a different item or combination
Description 7/8" ID x 1/2" wide Adaptor for Freewheel Sprockets. CNC machined out of steel and zinc plated for a single, dual or multi speed freewheel sprocket. 7/8" ID x 1-3/8-24 OD right hand threads. 1/2" wide with a 3/16" key way, no set screw. Held in place by two 5/8” Ext. snap rings. Used on the gear & chain drive kits and lots of other uses.

My Cart

Your Shopping Cart is Empty

Best Sellers

Spoke 12 gage 260 mm or 10.236" for 26" wheel Steel Plated

Price : $0.39

Click to view

5/8" OD Shaft with a 3/16" full key way - Sold by the inch

Price : $1.22

Click to view

Bearing 49950-2HR 5/8" ID x 1-3/8" OD x 7/16" wide with retaining ring Friction Drive

Price : $7.36 $4.59

Click to view

1/2" OD Shaft Stock or Axle with full 1/8" key way

Price : $1.10

Click to view

5/8" External Snap Ring

Price : $0.21

Click to view

3/16" x 3/16" x 1/2" Sq. Carbon Steel Key

Price : $0.26

Click to view

Spoke & Nipple, 9-5/8" - 244 mm 14 gage

Price : $0.29

Click to view

Recently Viewed Items

	Product - 10 mm Flat Washer Zinc
	Product - 10 mm x 1.0 Flange Nut Zinc Plated
	Product - 14" long 1/2" x 1/2" Support
	Product - 16mm Flat Washer has a 17.15mm ID x 29.65mm OD x 2.90mm thick, Zinc Plated.
	Product - 18.75 to 1 INSIDE DRIVE Reduction Gearbox fits most 76 mm Clutched Engines.
	Product - 18.75 to 1 Staton gearbox Three output shafts 1/2" Mid Drive
	Product - 1-1/4 x 2.5 inch Angle bracket
	Product - 1/2" External - Retaining Snap Ring
	Product - 1/2" OD Shaft Stock or Axle with full 1/8" key way
	Product - 1/4-20 x 1-1/2" Socket Head Cap Screw black
	Product - 1/4-20 x 1/2" Socket Head Cap Screw
	Product - 1/4-28 x 1-1/2 FINE thread, Socket Head Cap Screw.
	Product - 1/4 NPT with 1/16" Drilled Vent hole
	Product - 22.5cc Two Cycle Engine with 52 mm clutch rotor
	Product - 26" Kick Stand Black - Steel
	Product - 2.62" OD Wheel Idler Bearing 6203-2RS HBC
	Product - 32 Tooth Sprocket 1/2" x 1/8" with 3/4" ID and Set Screw
	Product - 35 Sprocket 10 tooth 5/8" ID machined to .585" wide
	Product - 3/16" x 1/2" round key dowel pin
	Product - 3/16" x 3/16" x 1/2" Sq. Carbon Steel Key
	Product - 3/4" External Snap Ring
	Product - 3/8-16 HEX KEPS NUT PLTD.
	Product - 3/8-16 RG FULL NYLON INS NUT L/N Zinc nut
	Product - 3/8-16 x 4" Thumb Screw with std & Keps nut
	Product - 3/8-16 x 6" Tap Bolt Hex Head Zinc
	Product - 44 Tooth Sprocket 1/2" x 1/8" with 3/4" ID and Set Screw
	Product - # 48 Brass Throttle cable end
	Product - 4mm x 4mm x 20mm long Metric Key
	Product - 5/8" External Snap Ring
	Product - 5/8" ID Adaptor for freewheel sprocket 13, 14 & 15 tooth 30mm x 1.0 OD
	Product - 5/8" ID x 1/2" wide Adaptor for freewheel sprocket
	Product - 5/8" Machine Washer 18 gage
	Product - 5/8" OD Shaft with a 3/16" full key way - Sold by the inch
	Product - 5/8" machine washer 14 gage
	Product - 5" Extension bracket
	Product - 5mm .80 x 14mm long Button Head Cap Screw
	Product - 6M x 18M Fender Washer, Zinc
	Product - 6 mm Flat Washer Zinc
	Product - 7/8” ID Adaptor for freewheel sprockets 1.10" wide 2 set screws