5/8" Machine Washer 18 gage: Staton Inc

Staton-Inc.
3310 S. Brunson Street
Oklahoma City, OK
73119 USA

Phone & Fax:
(405) 605-3765

Sales Questions:
sales@staton-inc.com

Technical Questions:
davidstaton@staton-inc.com

My Profile

Home / Drive Components and Hardware

Printable Version

5/8" Machine Washer 18 gage
Click over image to enlarge	Price: $0.19 Manufacturer: Staton-Inc Product ID: 2462 Weight: 0.05 lbs Special Offer Buy 20 - 50 get 20.00000 % off E-mail to a friend \| Add To Wish List
Purchase
Quantity :
	The selected item is out of stock, please select a different item or combination
Description 5/8" ID Machined Flat Washer. 18 gage or .047" thick. Zinc Plated.

My Cart

Your Shopping Cart is Empty

Best Sellers

Spoke 12 gage 260 mm or 10.236" for 26" wheel Steel Plated

Price : $0.39

Click to view

5/8" OD Shaft with a 3/16" full key way - Sold by the inch

Price : $1.22

Click to view

Bearing 49950-2HR 5/8" ID x 1-3/8" OD x 7/16" wide with retaining ring Friction Drive

Price : $7.36 $4.59

Click to view

1/2" OD Shaft Stock or Axle with full 1/8" key way

Price : $1.10

Click to view

5/8" External Snap Ring

Price : $0.21

Click to view

3/16" x 3/16" x 1/2" Sq. Carbon Steel Key

Price : $0.26

Click to view

Spoke & Nipple, 9-5/8" - 244 mm 14 gage

Price : $0.29

Click to view

Recently Viewed Items

	Product - 10 mm Flat Washer Zinc
	Product - 10 mm x 1.0 Flange Nut Zinc Plated
	Product - 14" long 1/2" x 1/2" Support
	Product - 16mm Flat Washer has a 17.15mm ID x 29.65mm OD x 2.90mm thick, Zinc Plated.
	Product - 18.75 to 1 INSIDE DRIVE Reduction Gearbox fits most 76 mm Clutched Engines.
	Product - 18.75 to 1 Staton gearbox Three output shafts 1/2" Mid Drive
	Product - 1-1/4 x 2.5 inch Angle bracket
	Product - 1/2" External - Retaining Snap Ring
	Product - 1/2" OD Shaft Stock or Axle with full 1/8" key way
	Product - 1/4-20 x 1-1/2" Socket Head Cap Screw black
	Product - 1/4-20 x 1/2" Socket Head Cap Screw
	Product - 1/4-28 x 1-1/2 FINE thread, Socket Head Cap Screw.
	Product - 1/4 NPT with 1/16" Drilled Vent hole
	Product - 22.5cc Two Cycle Engine with 52 mm clutch rotor
	Product - 26" Kick Stand Black - Steel
	Product - 2.62" OD Wheel Idler Bearing 6203-2RS HBC
	Product - 32 Tooth Sprocket 1/2" x 1/8" with 3/4" ID and Set Screw
	Product - 35 Sprocket 10 tooth 5/8" ID machined to .585" wide
	Product - 3/16" x 1/2" round key dowel pin
	Product - 3/16" x 3/16" x 1/2" Sq. Carbon Steel Key
	Product - 3/4" External Snap Ring
	Product - 3/8-16 HEX KEPS NUT PLTD.
	Product - 3/8-16 RG FULL NYLON INS NUT L/N Zinc nut
	Product - 3/8-16 x 4" Thumb Screw with std & Keps nut
	Product - 3/8-16 x 6" Tap Bolt Hex Head Zinc
	Product - 44 Tooth Sprocket 1/2" x 1/8" with 3/4" ID and Set Screw
	Product - # 48 Brass Throttle cable end
	Product - 4mm x 4mm x 20mm long Metric Key
	Product - 5/8" External Snap Ring
	Product - 5/8" ID Adaptor for freewheel sprocket 13, 14 & 15 tooth 30mm x 1.0 OD
	Product - 5/8" ID x 1/2" wide Adaptor for freewheel sprocket