Categories

Manufacturers

Newsletter

Contact Us

Staton-Inc.
3310 S. Brunson Street
Oklahoma City, OK
73119 USA

Phone & Fax:
(405) 605-3765

Sales Questions:
sales@staton-inc.com

Technical Questions:
sales@staton-inc.com

Honda GXH50 49.3 cc 2.50 hp Max. INSIDE Drive

Honda GXH50 49.3 cc 2.50 hp Max. INSIDE Drive
Click to enlarge

More images

Click to enlarge
Sale Price: $859.00
Compared at: $1,099.00
You Save: $240.00
Product ID : 0018
Weight: 40.00 lbs

Purchase

14.40 to 17.40 mph 8 Tooth with 26” Wheel - 16 tooth on Hub
16.20 to 19.20 mph 9 Tooth with 26” Wheel - 16 tooth on Hub
18.04 to 21.04 mph 10 Tooth with 26” Wheel - 16 tooth on Hub
19.80 to 22.80 mph 11 Tooth with 26” Wheel - 16 tooth on Hub
21.60 to 24.60 mph 12 Tooth with 26” Wheel - 16 tooth on Hub
23.40 to 26.40 mph 13 Tooth with 26” Wheel - 16 tooth on Hub
25.20 to 28.20 mph 14 Tooth with 26” Wheel - 16 tooth on Hub
27.08 to 30.08 mph 15 Tooth with 26” Wheel - 16 tooth on Hub
28.80 to 31.80 mph 16 Tooth with 26” Wheel - 16 tooth on Hub
30.60 to 33.60 mph 17 Tooth with 26” Wheel - 16 tooth on Hub
32.50 to 35.50 mph 18 Tooth with 26” Wheel - 16 tooth on Hub
36 Hole 14 gage - Standard Gage
36 Hole 12 gage - Heavy Duty Gage
48 Hole 14 gage - Standard Gage
32 Hole 14 gage - Standard Gage
28 Hole 14 gage - Standard Gage
135mm or 5.315" to 140 mm or 5.512” good for 5 to 8 Speed Freewheels
110 mm or 4.33” - Single Speed Freewheel

Description


Honda GXH50 49.3 cc 2.10 hp Net 2.50 hp Max. Four Cycle Engine.

This kit has the Super Duty clutch with the 2,750 rpm spring engagement.

This is a complete kit including the engine listed above, plus the following parts that are needed to install on most bicycles:

1. The Staton-Inc 18.75 to 1 INSIDE Drive gear reduction box that has Six high speed double sealed ball bearings, 1/2" thick gears, a 5/8" outside drive output shaft that has a 3/16" key way along with two snap ring groves to hold the sprocket in place.

2. The Staton-Inc CNC custom machined dual threaded hub that has FOUR high speed double sealed ball bearing, your pick of a 28 hole, 32 hole, 36 hole or 48 hole spoke hub.  Includes a 10M x 1.0 x 7-7/8" long axle, two 10m x 1.0 flange nuts, the center of hole to center of hole is 2.052".
The person re lacing the hub will have to DISH the wheel and add spacers to one or both sides to match your bike.

3. A machined 410H sprocket up to 18 tooth for the gear box.

4. Sprocket & chain guard

5. 16 tooth x 1/8" Left hand threaded freewheel sprocket for the left side of the hub.

6. Approximately 48" of 410H chain 1/2" x 1/8" and one connecting link.

7. A 90" long throttle cable and finger / thumb lever for the throttle control. (this can be cut to a shorter length)

8. Remote toggle engine stop switch for safety

9. The U shaped mounting bracket and four supports for the gear box.

10.  New CNC machined 1" x 1" x 14" angle brackets and spacer, zinc plated.

Plus many other small parts needed for mounting. You may need other hardware that is not included in the kit.

Be sure and order the 5" or 8" Extension bracket set if needed.

40 lbs shipping wight.  These kits are double boxed.  First put in a 14 x 14 x 14 Double wall box, then put in a 16 x 16 x 16 Double Wall box.

Product Reviews

Login or Register to write the first review.

Products You May Like

Product ID : 2931
Weight: 32.00 lbs
$799.00
$549.00
Product ID : 3217
Weight: 32.00 lbs
$859.00
$549.00
Product ID : 0017
Weight: 32.00 lbs
$749.00
$549.00
Product ID : 3586
Weight: 40.00 lbs
$1,099.00
$859.49
Product ID : 3183
Weight: 32.00 lbs
$749.00
$549.00
Product ID : 2929
Weight: 32.00 lbs
$749.00
$549.00