16 Tooth 410 Sprocket 5/8" ID with 3/16" Key way & two set screws with zinc plating.
Machined for most of our Outside drive & Inside drive Gearboxes with the shorter shaft.
Over all hub width is .875" and has a counter boar of .75".
If used on our short shaft gearboxes you will still will use the outer 5/8" snap ring as a safety along with a 3/16" x 3/16" x 3/4" long key and the two set screws keeps the sprocket from sliding on the shaft.
This sprocket has a 1/2" pitch x 1/8" wide teeth with a 3/16" key way.
These sprockets are made to be used with 410, 410H chain 1/2" pitch x 1/8" wide teeth, can also be used with the wider 415, 415H (1/2" pitch x 3/16" wide teeth) and with the 41 chain that is (1/2" pitch x 1/4" wide teeth)
CHAIN KMC 1/2" x 1/8" Sold By The Foot.
http://www.staton-inc.com/store/products/CHAIN_KMC_1_2_x_1_8_Sold_By_The_Foot-1120-0.html
Sram PC - 1 Power Chain 1/2" x 1/8" 114 Links
http://www.staton-inc.com/store/products/Sram_PC_1_Power_Chain_1_2_x_1_8_114_Links-1110-0.html
Chain 410H Silver Nickel, 1/2" x 1/8". 98 Links
http://www.staton-inc.com/store/products/Chain_410H_Silver_Nickel_1_2_x_1_8_98_Links-612-0.html
Master Link / Connecting Link 410H 1/2" x 1/8" Silver - Nickel
http://www.staton-inc.com/store/products/Master_Link_Connecting_Link_410H_1_2_x_1_8_Silver_Nickel-606-0.html
Offset or half Link 1/2" x 1/8" 410 # 43 # 65 Chain
http://www.staton-inc.com/store/products/Offset_or_half_Link_1_2_x_1_8_410_43_65_Chain-1121-25.html
