This is just to LOOK at and read about, NOT for sale.

Honda GXH50 49.3cc Four Cycle engine, Hybrid Drive with 24 Volt 600 Watt Currie Electric Motor with #25 freewheeling sprocket.

Note:  The motors with the Solid sprockets - Non freewheels will not work as good as the freewheel sprockets and you should use a power disconnect when not using the electrice motor.

Shown is a INSIDE drive gearbox.  You could use a 18.75 or 16.07 to 1 reduction gearbox with the added mid Drive output shaft.

You could also do this with a Outside Drive or Dual Drive gearbox.

The gearbox has been put in a 3 o'clock postition so the engine and gearbox would mount in Frount of the sprocket that is driven.

This is just information and pictures ONLY.

If you want to buy this you would add each part to your cart.

Below is a partial list.

http://www.staton-inc.com/store/products/Honda_GXH50QXA_15_8_mm_shaft_OD_49_3_cc_1_0_hp_up_to_2_50_hp_max_Honda_four_stroke_engine-408-0.html

http://www.staton-inc.com/store/products/18_75_to_1_INSIDE_DRIVE_Reduction_Gearbox_fits_most_76_mm_Clutched_Engines-834-0.html

http://www.staton-inc.com/store/products/16_07_to_1_reduction_INSIDE_Drive_Gearbox_with_9_16_18_Clutch_Drum-1370-0.html

http://www.staton-inc.com/store/products/Honda_GXH50_QXA_76_mm_Clutch_Rotor_Adapter_kit-483-0.html

http://www.staton-inc.com/store/products/Honda_GXH50_Clutch_Rotor_Super_Duty_3_shoe_2_750_rpm-800-0.html

http://www.staton-inc.com/store/products/Honda_GXH50_M6X2_Adapter_QXA_1_5_thick-879-0.html

NOTE: You will also need to order: Four 1/4-28 FINE THREAD x 1-1/2" LONG Socket head cap screws.

3/16" x 1/2" round key dowel pin

Shaft  Collar 5/8" ID Steel with set screw

6M x 18M Fender Washer, Zinc

1/4-28 x 1/2 FINE THREAD Button Head

Do NOT add this to you order as it will increase the weight and bill you shipping cost that is non refundable.