Sprocket Adaptor for the Schwinn Meridian Trike 17 mm ID x .8" wide, has 6 mm keyway with two set screws along with three 1/4-20 drilled and taped holes to attach the sprocket.
Note: You will need to order the 6 mm x 6 mm x 20 or 25 mm long square key. Not included. Product ID # 4303 or 4304.
The three 1/4-20 holes are 1.2" apart with a Bolt Circle Diameter: 1.4".
We have several sizes of sprockets that will bolt to this adaptor.
Make sure the Sprocket hole pattern matches the adaptor.
No Welding and you can change ratios just by changing the sprocket on the same adaptor.
If you are adding a gas engine or electric motor to the Schwinn Meridian Trike the 410 36 tooth 1/2" x 1/8" sprocket is the largest that will fit between the frame supports. Up date: 11-9-18 We just had a customer tell us that the 36 tooth does not fit, so they may changed the frame design.
Be sure and order 3 of the bolts below.
CLICK HERE to order the Socket Head Cap Screw 1/4"-20 x 1/2" long.
CLICK HERE for a list of Sprockets that will fit this Adaptor.