Peerless Differential 1" OD x 38" long Axle Model 141-D # 794102
Peerless Brand Differential 1" OD x 38" long Axle Model 141-D # 794102.
Be sure and order Two (2) of the 3/4-16 nylock nuts as they are hard to find local. 3/4-16 Nylock NE Zinc Plated Nut
We also stock a very wide range of sprockets for this differentical and Disc rotors in two sizes.
If you add a Disc brake you may want to add:
5/16-18 x 4.41" OAL or 4.10" long HH Grade 8 BLACK. Bolt Part number # 792093
Overall Width 38" x 1" dia. x 35-1/4" with 6" x 1/4" key way & 1 woodruff key slot, axle with 3/4-16 threaded ends.
Hub width is 6.58" see picture.
These also can be shortened by cutting the ends with a hack saw.
Use one or two 1" ID Steel Shaft Collar with set screw Black Oxide to secure the wheels.
You may also want to install a Shaft Collar 1" ID Double Split Steel Cyclone, Pedicab on each side so the Bushing does not come out. Order two.
We may take this apart in order to ship in a smaller box. Note: The one taken apart was a 3/4" and no threads on the end. You are ordering a 1" Dia. with threaded ends.
We also sell the sprockets to fit the four hole pattern.
http://www.staton-inc.com/store/index.php?p=catalog&parent=105&pg=1
If you need pillow block bearings to support the axle we have them too.
NOTE: You can brake both wheel using a Disc or drum Brake from the HUB and have a Disc or drum Brake on each axle so if one lost traction you could Brake that side and send power to the wheel on the ground.
We have included a picture of the parts list. If you need parts for this differential, email us with the Part numbers and the quantities.
We will get a price at that time via email.
The 100 Differential can be used in conjunction with the 700 Series Transmission and is available with sprockets.
Specifications | |
---|---|
Output torque | 150 lb-ft / 203.37 Nm |
Rear axle diameter | 1 inch / 25.4 mm |
Weight on axles | 600 lbs / 272.16 kg |
Axle bearings | Bushings |
Axle ends and length | Application Specific. Contact Factory for available options. |
Differential housing | Die Cast Aluminum |
Mounting | Application Specific. Contact Factory for application specific information. |
Weight | 10 lbs / 4.54 kg |
Lubrication | Bentonite Greased from the factory. |
Sprocket type |
Staton-Inc has a wide range of sprockets to fit this and we custom machine in house. |
Shipping weight is 18.5 lbs