Delrin Sprocket Idler, 3" OD x 2" Track x .690"

Delrin Sprocket Idler, 3" OD.   It has a 2" OD for the chain to track on.  The width of the track is 0.69"

Used with our Shift kits.

CNC machined for a press fit 1-3/8" OD bearing and has a snap ring grove to hold in the bearing.

No other parts are included.

You will need a High Speed Double Sealed Ball bearing with a 1-3/8" OD X 7/16" WIDE.
http://www.staton-inc.com/store/products/Bearing_230_733_99502H_5_8_ID_x_1_3_8_OD_x_7_16_Wide-5-1.html
or
http://www.staton-inc.com/store/products/Bearing_230_276_1621_2RS_1_2_ID_x_1_3_8_OD_x_7_16-22-1.html
or
http://www.staton-inc.com/store/products/Bearing_1622_2RS_9_16_ID_x_1_3_8_OD_x_7_16_wide-8-1.html

You will also need a 1-3/8" INT RET RING, N1300-137 to hold the bearing in place.
http://www.staton-inc.com/store/products/1_3_8_INT_RET_RING_N1300_137-1023-0.html

Depending on the size of the ID you need and how you how the idler to work you may also need a Oil Impregnated Brass Bushing:

http://www.staton-inc.com/store/products/Brass_Flange_Bushing_3_8_ID_x_5_8_OD_x_1_OAL_x_7_8_OD_x_1_8_FB_610_08-1010-0.html
or
http://www.staton-inc.com/store/products/Brass_Flange_Bushing_3_8_ID_x_5_8_OD_x_3_4_OAL_7_8_OD_x_1_16-1011-0.html