# 35 A 72 Tooth Sprocket CNC machined for the left or right 5 Hole flange type freewheel sprockets. Sprocket OD is 8-3/4". Black Finish.
You will need to use #35 Chain with this left hand freewheel.
We have machined the sprocket ID to match the OD of the Five hole flanged left hand threaded freewheel - sprag clutch that has Five, 5mm x .80 drilled and tapped holes.
We also drilled the five hole pattern in the sprocket to match the freewheel.
You will need to order five, 5mm x .80 x 14mm Button Head Cap Screws to attach the two together.
You will need to order five, nylock nuts to make sure they do not come loose.
This "freewheel" is easy to remove if needed. Order the tool below.
Click Here for one of our removal tools.
Or
Click Here for another of our removal tools.
These are used on our Axle mounted kits and for other projects.
Note: The sprocket can be placed on the outer side of the flange, but it will move the sprocket and chain closer to your frame. If used with an Axle mount kit the Angle bracket will be real close to the sprocket and will be hard to get to the bolts.
Weight: 2.20 lbs
.jpg?m=1773684017)
