Motorized Bicycles Detail Page

<< Back
20 Tooth 410H Sprocket Heat Treated and Zinc Plated

Aditional Image(s):

20 tooth 410H Sprocket. 5/8 inch ID 410H Machined for most of our outside drive & Inside drive Gear Boxes with the shorter shaft. These are milled to a 1/2 inch thick, heat treated and zinc plated. This sprocket has a 1/2 inch pitch x 1/8 inch wide teeth with a 3/16 inch key way. These sprockets are made to be used with 410H chain but can also be used with the wider 415H (1/2 inch pitch x 3/16 inch wide teeth) and with the wider #41 chain that is (1/2 inch pitch x 1/4 inch wide teeth).
Price: $20.00
Quantity
Color

Send To Friend

	The products below were also bought by people who bought 20 Tooth 410H Sprocket Heat Treated and Zinc Plated
	3/16 x 3/16 x 1/2 Sq. Key
	Shaft Collar, 5/8 inch steel with set
	5/8 inch OD Shaft with a 3/16 inch full key way.
	Bearing Pillow Block UCP202-10 5/8 ID
	16 tooth x 3/32 three prong sprocket
	18.75 to 1 INSIDE DRIVE Reduction Gear Box fits most 76 mm Clutched Engines.
	20 Tooth freewheel 3/32 ACS
	3/16" x 3/16" x 1/2" Sq. Key
	3/8 -16 x 6 Grade 8 Yellow plating
	5/8 Ext. Snap Ring 68013
	15 Tooth 410H Sprocket Heat Treated and Zinc Plated
	Bearing 230-733 99502H 5/8" ID x 1-3/8" OD x 7/16" Wide.
	Hour & Tach Meter with bracket
	14 inch long x 1/2 inch Support
	10 Tooth 410H or #65 Sprocket Heat Treated and Zinc Plated
	GIANT STILETTO Jack Shaft 5/8" OD x 6-3/4" long
	Honda GXH50 Adaptor QXA 1.5 inch thick
	Chain 410H Silver Nickel, 1/2 x 1/8 , 98 Links.
	Adaptor Three Prong drive plus a 5/8" ID x 1/2" wide Freewheel
	Honda GXH50 Clutch Rotor Super Duty 3 shoe
	8 Tooth 410H or #65 Sprocket Zinc Plated #65
	8 Tooth 410H Sprocket Heat Treated and Zinc Plated
	5/8" OD Shaft with a 3/16" full key way
	12 Tooth 410H Sprocket Heat Treated and Zinc Plated
	PEUGEOT Suspension Seat 1” OD x 6”
	U Bracket, 5 inch legs Gear & Chain Drive kits
	1/4-28 x 1-1/2 FINE thread, Socket Head Cap Screw.

	Related Products. The products below are related to 20 Tooth 410H Sprocket Heat Treated and Zinc Plated
	18.75 to 1 INSIDE DRIVE Reduction Gear Box fits most 76 mm Clutched Engines.
	18.75 to 1 Outside Drive Reduction Gear box for most 76 mm Clutched Engines.
	3/16" x 3/16" x 1/2" Sq. Key
	5/8" Ext Snap Ring
	8 to 20 Tooth 410H or #65 Sprocket Heat Treated and Zinc Plated
	Chain 410H Silver Nickel, 1/2 x 1/8 , 98 Links.

Click here to write a Product review

*Staton-Inc.com is not responsible for typographical or photographical errors. Prices and specifications are subject to change without notice.*